HG08DC-32 Series Fully Automatic Parallel Concentrator
Nitrogen concentrators utilize a water bath to rapidly concentrate samples by blowing nitrogen gas onto the heated sample surface. They are widely used for sample pretreatment in gas phase, liquid phase, and mass spectrometry analysis. The easy-to-use device simplifies the complex concentration process.
Product Details
This nitrogen purge concentrator utilizes a water bath to rapidly concentrate samples by blowing nitrogen gas onto the heated sample surface. It is widely used for sample pretreatment in gas phase, liquid phase, and mass spectrometry analysis. Its easy operation simplifies the tedious concentration process.
▮ Instrument Parameters: HG08DC-32
◾ Ambient temperature: 15°C to 35°C
◾ Relative humidity: 45% to 80%
◾ Operating voltage: 220V/110V, 50Hz
◾ Operating power: 2200W
◾ Output pressure range: 0-72.5psi.
◾ Nitrogen purge input pressure range: 7-145psi.
◾ Number of sample stations: Up to 32 channels can be used simultaneously, supporting group control, allowing for the simultaneous concentration of up to 32 samples, providing flexibility and convenience. 200ml volumetric flask.
◾ The nitrogen blow needle is made of 316 stainless steel for high corrosion resistance and features a quick-change design, allowing users to replace it as needed.
◾ A wide variety of test tube holders are available, suitable for various test tubes, centrifuge tubes, Erlenmeyer flasks, evaporating flasks, and more, with a volume range of 1-200ml.
◾ Highly consistent nitrogen flow rate across all air holes, with adjustable nitrogen flow and pressure, displayed in real time.
◾ Nitrogen vortex purge technology effectively increases the purge area and prevents air splashing.
◾ Multiple channels and positions can be controlled by solenoid valves or valve blockages. Each channel comes standard with a needle-shaped regulating valve with a dial. 13. PTC heating elements ensure uniform and reliable water bath operation.
◾ PTC heating elements ensure uniform and reliable water bath operation.
◾ Advanced fiber optic sensors automatically shut off and alarm at 0.5mL and 1mL sample levels.
◾ Intelligent quick-drain device; over-water level alarm and minimum liquid level alarm prevent dry-boiling and protect the heater.
◾ Equipped with a water bath internal circulation system for higher temperature control accuracy.
◾ The wide curved viewing window on the front of the water bath with built-in lighting allows for full monitoring of the concentration process without interrupting heating and nitrogen purge.
◾ Stainless steel water bath, corrosion-resistant and rust-resistant, for durability.
◾ The water bath utilizes precise PID temperature control with an accuracy of ±0.5°C and a control range from room temperature to 100°C.
◾ The control terminal features an 8-inch high-definition touchscreen display with an integrated design and a display resolution of 800×480.
◾ Features manual and automatic dual-mode control, built-in lighting, and a single-touch opening and closing function for the total nitrogen valve.
◾ Digital timer automatically turns on nitrogen purge when the set temperature is reached, conserving nitrogen gas. Heating automatically shuts off when the timer expires, eliminating the need for operator supervision.
◾ Switchable Chinese and English interface displays real-time nitrogen pressure, water bath temperature, and concentration time.
◾ Remote monitoring function displays concentration parameters in real time on the remote control app, allowing for easy remote notification.
◾ Compact design minimizes fume hood space.
◾ Automatic volume control.