HG08DC series fully automatic dry parallel concentrator water bath heating

The HG08DC-12/24/36/50 parallel concentrator utilizes water bath heating and nitrogen gas blowing onto the heated sample surface for rapid concentration. It is widely used for sample pretreatment in gas phase, liquid phase, and mass spectrometry analysis. Its easy operation simplifies the tedious concentration process.

▮  Technical Parameters HG08DC-12/24/36/50
◾ Ambient Temperature: 15°C to 35°C
◾ Relative Humidity: 45% to 80%
◾ Operating Voltage: 220V/110V, 50Hz
◾ Operating Power: 2200W
◾ Output Pressure Range: 0-72.5psi
◾ Nitrogen Blow-Input Pressure Range: 7-145psi
◾ Number of Samples: Up to 12 channels can be used simultaneously, with support for group control, allowing for the simultaneous concentration of 12, 24, 36, or 50 samples, providing flexibility and convenience. Volumetric flasks 20-300 ml
◾ Nitrogen blowdown needles are made of 316 stainless steel for high corrosion resistance and feature a quick-change design, allowing users to replace them as needed.
◾ A wide variety of test tube holders are available, suitable for various test tubes, centrifuge tubes, Erlenmeyer flasks, evaporating flasks, and more. Volume range: 1-150 ml
◾ Highly consistent nitrogen flow rate across all air holes, with adjustable nitrogen flow and pressure, displayed in real time.
◾ Nitrogen vortex purge technology effectively increases the purge area and prevents splashing.
◾ Each channel and position can be controlled by a solenoid valve or valve block; each channel is standard. The needle-shaped regulating valve with a dial allows users to fine-tune the gas flow rate of each channel using the clearly displayed Arabic data.
◾ PTC heating elements ensure uniform and reliable water bath operation.
◾ Advanced fiber optic sensors provide automatic shutoff and alarm control at 0.5mL and 1mL sample levels.
◾ Intelligent quick-drain device; over-limit water level alarm and minimum liquid level alarm prevent dry-boiling and protect the heater.
◾ Equipped with an internal water bath circulation system for higher temperature control accuracy.
◾ The wide curved viewing window on the front of the water bath, with built-in lighting, allows for nitrogen flushing without interrupting heating. Monitor the entire concentration process.
◾ The water bath liner is treated with a special anti-corrosion coating for corrosion and rust resistance, ensuring durability.
◾ The water bath utilizes PID temperature control with an accuracy of ±0.5°C and a temperature range from room temperature to 100°C.
◾ The control terminal features an 8-inch high-definition touchscreen display with an integrated design and a display resolution of 800×480.
◾ It offers manual and automatic dual-mode control, built-in lighting, and one-touch nitrogen valve opening and closing.
◾ A digital timer automatically activates nitrogen purge upon reaching the set temperature, conserving nitrogen gas. When the timer expires, the nitrogen purge automatically activates. Automatic heating shutoff eliminates operator oversight.
◾ Switchable between Chinese and English interfaces, with real-time display of nitrogen pressure, water bath temperature, and concentration time.
◾ Remote monitoring function, with real-time display of concentration parameters on the remote control program, allowing for easy remote push notifications.
◾ Compact design, minimizing fume hood space.
◾ Optional automatic water refill system.
◾ Automatic volume control.
▮ Specifications: HG08DC-12/24/36/50
◾ One main unit
◾ One control system
◾ One parallel blowpipe
◾ One nitrogen system.